How to reset Wyze Scale (Not S)? (2023)

FAQs

How to reset Wyze Scale (Not S)? ›

To factory reset the scale: Tap on the scale surface to wake it up. On the back of the scale, press the reset button ~5 seconds until CLr displays. When CLr displays, your scale is reset.

You may need to replace the batteries. Check that the batteries are installed correctly in the back panel of the device, then step on the scale. If the screen doesn't automatically turn on, replace the batteries. Step on the scale again.

The best way to calibrate or check how accurate it is, by putting a dumbbell on the scale of 5 pounds or more and seeing what it says, This gave me a good reading when it does not read accurately to see how inaccurate it was.

How do I factory reset my Wyze Scale S? Tap on the surface of the scale to activate it, find the UNIT/RESET button on the back of the scale.

Make sure Wyze Scale S is on and activated while trying to pair. Tap on it with your foot first to activate it. Power cycle the scale by removing and reinstalling the battery. Check if the “Only Measure with App Open” mode is turned on.

Wyze Scale S vs. Wyze Scale. The main difference between the Wyze Scale S and the original Wyze Scale ($19.99) is that the latter can measure your heart rate through your feet. The Scale S makes up for that shortcoming with an app-based heart rate measurement tool and an exclusive mode for babies and pets.

A scale that is used multiple times a day or every day of the week is subject to more wear and tear than a scale that is only used once every few days. If your scale is being used frequently, it's calibration should be checked more often - once every month, or perhaps even every week.

Incorrect Weight:

Check if you're using Athlete Mode. Athlete Mode should only be enabled for users with 3-5% body fat. In the Wyze app, tap on your Wyze Scale S > Settings > Users > your Nickname. Turn Athlete Mode off, if needed.

Why is my WYZE scale not showing the right weight? ›

Reasons why your data might be missing:

Your feet are not fully in contact with the scale. Step off the scale, then on again with your feet in the middle of the scale. You moved before the measurement was complete. Hold still until the measurement is shown.

The button to set the digital scale to zero is normally the power button, but it can have various names such as “zero”, “tare” or “reset”. Most digital scales are factory set to auto shut off after a period of inactivity.

To zero, or tare, your scale: If your scale does not display zero weight when turned on with nothing placed on it, simply press the ON/OFF button and the scale will reset to zero.

No, you don't need the app open.

Once connected via Bluetooth, the scale will sync and upload your measurements to the app.

To set up your Wyze Scale S:

Before starting, place your Wyze Scale S on a hard, flat surface and enable Bluetooth on your phone. In the Wyze app, tap the + plus sign > Add Device > Lifestyle > Wyze Scale S. Your phone will search for your scale, pair with it, and connect to it.

If you're having trouble getting the Bluetooth scale to connect, try the following: Enable Bluetooth and Scale Connections. Reconnect your Device. Close App & Remove Batteries from Scale.

The Share feature lets other people access and use your Wyze Scale. Have a friend or family member who wants to check their measurements? Wyze Scale automatically recognizes and syncs data for up to eight unique users and can take one-off measurements for an unlimited number of guests.

Er1: Weight not in supported range. Please measure again. See: What is the weight range? Er2: Unstable measurement.

Download the Wyze app (available for Android and iOS), click Add a Product, select the Scale from the list, and follow the instructions that appear. The Scale comes with a handy quick start guide explaining how to set it up.

Which is the best WYZE scale? ›

The Wyze Scale X earned a top spot on our list of the best smart scales of 2023 thanks to its high level of customizability. It has multiple different presets, including modes for weight babies, pets and even your luggage.

The Wyze scale, however, proved to be one of the most accurate scales we tested in terms of weight. Comparing it to readings on an analog scale, the Wyze was never more than 0.2 pounds off. In comparison, some of the other scales, like the Fitbit Aria Air, varied by up to a pound.

The Wyze Scale S and Wyze Scale offer roughly 18 months of battery life from three AAA batteries and four AA batteries, respectively.

AN UNBALANCED LOAD. If there is an imbalance in the weight being placed on the scale, it can also cause the scale to give inaccurate readings. For example, if there is a heavy object on one side of the scale and a light object on the other side, the scale may give an inaccurate reading.

The accuracy and reliability of your scale will degrade slowly over time and a regular calibration can prevent you from getting inaccurate results. That means that foregoing your calibration can be a risky decision, which could result in unscheduled down time, bad product quality and even product recalls.

If the scale registers anything other than 10 pounds, or doesn't return to zero, this may mean it's having mechanical problems or load cell problems. In this case, your scale needs to be calibrated or replaced. Many digital scales have a calibration mechanism that may need to be reset, so check for that as well.

Scale Is On An Uneven Surface

Always weigh your items on an even surface. If it's uneven in any way, the legs of the scale will shift towards sloped parts, which means more pressure will be put on certain parts of the scale as well. This results in bad and inaccurate readings all the time.

With the camera plugged into power, continuously hold the setup button on the camera for 10 seconds. For Wyze cam v1, press and hold the button for 20 seconds. The reset process should initiate in about 30 seconds. The reset process takes 2 – 3 minutes.

While it's a myth that muscle weighs more than fat—after all, a pound is a pound—it is denser, which means it takes up less space in the body. This may explain why you look slimmer but the scale hasn't budged. Water weight could also be a factor, according to strength and conditioning coach Brandon Mentore.

Why does my scale keep showing different weight? ›

#1 Every time a digital scale is moved it needs to be calibrated. Initializing the scale resets the internal parts allowing the scale to find the correct “zero” weight and ensure accurate readings. If the scale is moved and you do NOT calibrate it, you are likely to see fluctuations in your weight.

If your diet is full of salty foods, this can cause water retention and thus increase the number on those scales. "The reason these weight fluctuations occur is because of body fluid fluctuations -- your body might retain water from a high sodium consumption, or you may not have gone to the bathroom yet," Clark said.

Unless your weight has been stuck at the same point for more than 1–2 weeks, you probably don't need to worry about anything. A weight loss plateau may be explained by muscle gain, undigested food, and fluctuations in body water. If the scale doesn't budge, you might still be losing fat.

Do you ever wonder why the number on the scale doesn't move after you've made many changes to your diet and lifestyle? When the scale doesn't move, you are losing body fat while gaining muscle. Your weight may stay the same, even as you lose inches, a sign that you're moving in the right direction.

Perform Span Check: Place the verification weights in the center of the scale. Record the weight to readability of the scale. Confirm repeatability by placing one of the weights on the scale a second time to obtain the same weight. Confirm that the reading returns to zero when the weights are removed.

Remove the new batteries and inspect the terminals for any corrosion left by the previous batteries. Take a small piece of sandpaper and lightly sand the contacts in the battery compartment, reinstall the new batteries and try powering the scale on again.

Coins are minted to precise specifications, including weight, so they can serve as calibration weights. For example, a U.S. nickel weighs 5 grams. A penny weighs 2.5 grams. These numbers easily multiply, so 10 nickels can serve as a 50-gram calibration weight.

What is Zeroing? Zeroing a scale (by pressing the "zero" button) tells the scale that there is nothing on the balance and to reset the measurement to zero. This function is usually performed before each use of the scale and takes into account any dust, debris, or change in the weighing plate.

The zero function essentially readjusts the true zero of your weighing scale and lets it know that there is nothing on the weighing pan.

Check and make sure the floor where the scale is being used is level. If scale is still reading incorrectly, it may be out of calibration. To double-check take a known weight and place it on the scale to see what it is reading. If the scale is not within tolerance, the scale may need to be calibrated.

How long do WYZE scale batteries last? ›

According to Wyze, users can expect up to 22 months of battery life from the Scale X's four 1.5V AAA batteries. The Wyze Scale S and Wyze Scale offer roughly 18 months of battery life from three AAA batteries and four AA batteries, respectively.

If the scale still gives inaccurate readings, try calibrating it. Most digital scales have a calibration function that can be accessed through a menu. Once the calibration is complete, your scale should give accurate readings.

AN UNBALANCED LOAD. If there is an imbalance in the weight being placed on the scale, it can also cause the scale to give inaccurate readings. For example, if there is a heavy object on one side of the scale and a light object on the other side, the scale may give an inaccurate reading.

The button to set the digital scale to zero is normally the power button, but it can have various names such as “zero”, “tare” or “reset”. Most digital scales are factory set to auto shut off after a period of inactivity.

The Wyze scale, however, proved to be one of the most accurate scales we tested in terms of weight. Comparing it to readings on an analog scale, the Wyze was never more than 0.2 pounds off. In comparison, some of the other scales, like the Fitbit Aria Air, varied by up to a pound.

The Lithium battery should last for approximately 10 years with an average family of 4 weighing once per day. Make sure the battery is installed correctly. If the problem continues, check and follow the warranty information. Lithium batteries have extremely small self-discharge, which prolongs the life of a scale.

It is not waterproof. Wet feet may affect accuracy. They also can make the scale slippery and not safe to use. Only step on the Wyze Scale with dry—or slightly damp—feet, and when the surface of the glass is not wet.